 | BASE PLATE WITH 5TH WHEEL PIN.
|
| | BELT SPEED- 350 FPM @ 18 DEG.
|
| | CAPACITY-700 TPH BASED IN 100#
|
| | CLEANING WING TYPE PULLEY
|
| | GEAR REDUCER- DODGE TXT#7 WITH
|
| | HEAD PULLEY- HD 18" DIA. DRUM
|
| | HEAD SHAFT- 3 15/16" SHAFT
|
| | HYD. FOLD DOWN RADIAL AXLE-
|
| | INSPECTOR.
|
| | LATTICE ANGLES- 2" X 2" X 1/4"
|
| | FOLDING HEAD AND TAIL SEC.
|
| | HYD. RAISE WITH 5HP MOTOR, PUMP,
|
| | MAIN FRAME 36" DEEP TRUSS
|
| | MARTIN PIT VIPER W/TWIST TENS.
|
| | OWNERS MANUAL- (2) COPIES FOR
|
| | PAINT- (1) COAT OF 2 PART
|
| | PLANETARY WHEEL DRIVE, W/BRAKE.
|
| | POWER TOP FOLDS
|
| | PRICED KRL 2/22/17
|
| | PULLEY WITH 3/8" HERRINGBONE
|
| | RADIAL RECEIVING HOPPER
|
| | RETURN IDLERS-CEMA B, PPI,
|
| | SEALED 45" RETURN IDLERS, 10'
|
| | SHEAVE, QD BUSHING AND BACKSTOP
|
| | SNUB SHAFT- 3 7/16" SHAFT WITH
|
| | STEEL SHOT BLASTED
|
| | SWITCHGEAR- NEMA 4 ENCLOSURE
|
| | CROSS ANGLES- 2" X 2" X 1/4"
|
| | DODGE TYPE E BEARINGS
|
| | DRIVE PULLEY-HD 24" DIA. DRUM
|
| | TO HAVE THEM CHECKED BY LOCAL
|
| | TRANSITION IDLERS- CEMA C, PPI
|
| | TROUGHING IDLERS- CEMA B, PPI,
|
| | URATHANE PAINT.(METSO BEIGE)
|
| | V-BELT DRIVE-WITH DRIVE GUARD
|
| | W/DODGE TYPE E BEARINGS
|
| | WITH 100' LEAD CORD.
|
| | TRAVEL AXLE-TANDEM WALKING BEAM
|
| | 20 DEGREE SEALED 5" DIA. TROUG
|
| | 35 DEGREE SEALED 5" DIA.
|
| | AXLE WITH (8) 11R X 22.5 TIRES
|
| | | | BEARINGS.
|
| | BRAKES, LIGHTS AND MUD FLAPS
|
| | CHORD ANGLES- 4" X 4" X 1/4"
|
| | DRIVE-CLASSII WRAP DRIVE.
|
| | GUARDS- TAIL PULLEY GUARD,
|
| | HEAD PULLEY. WE DO NOT WARRANT
|
| | HOPPER- 6' LONG WITH ADJUSTABLE
|
| | IDLERS.
|
| | LAGGING.
|
| | LEGS WITH WINCH AND CABLE.
|
| | FULL LEGTH UNDER SUPPORT ANGLES
|
| | LOCAL CODES. IT IS THE
|
| | MAINTENANCE AND PARTS.
|
| | MOTOR-40HP ELECTRIC WITH SHEAVE
|
| | CLEANING WING TYPE PULLEY.
|
| | PER CU/FT. OF MATERIAL
|
| | PLUMBING.
|
| | POWER TRAVEL-2 WHEEL DRIVE
|
| | PRIMER- (1) COAT OF 2 PART
|
| | PULLEY.
|
| | RESPONSIBILITY OF THE END USER
|
| | RUBBER FLASHING.
|
| | SHAFT W/DODGE TYPE S2000 BEARING
|
| | SNUB PULLEY- HD 16" DIA. SELF-
|
| | SPACING.
|
| | SWING DOWN CRANK JACK LANDING
|
| | TAIL PULLEY HD 16" DIA. SELF-
|
| | CYLINDER, RES. VALVE BODY AND
|
| | DRIVE PULLEY SHAFT AND BEARING
|
| | THAT OUR GUARDS WILL MEET ALL
|
| | TOWING/LIFTING EYE.
|
| | TAILSHAFT AND BEARING- 3 7/16"
|
| | TUBULAR UNDERCARRIAGE- HYDRAULIC
|
| | URATHANE PRIMER.
|
| | V-BELT GUARD AND NIP GUARD ON
|
| | WITH (4) 385/65R22.5 TIRES
|
| | 3PLY 3/16" X 1/16" CON. BELT
|
| | TROUGH IDLERS, 4' SPACING.
|
| | 3 15/16" SHAFT W/DODGE TYPE E
|
| | AND QD BUSHING
|
|
Currency Converter
E-mail This Page
Print Brochure
Telephone
Map 